Hog 1000 help. phone help, any help please!

Hello. I am a new user to the Hog 1000 and am having some issues. I have taken over a board with a bunch of preset things in menu banks etc, some preset groups and palettes. I have read the manual several times but am still having issues with a few things. Apparently my bosses do not want me to repatch any lights as they have things set in a way that works for them. I have three main questions.

First off: I have a 2 cue sequence on fader 1 that seems to work fine. Its just a wash with conventional lights, four mac 500's with yellow gobos projecting at the 12, 3, 6, 9 oclock postions( I'm working in a theatre in the round). When I pull down fader 1 and slide up fader 2 the yellow gobos are still there even though I have pressed play on fader 2 to start the cuelist. They do go away when I get to cue 2 on fader 2 but I think they shouldn't even be coming up in the first place. I'm thinking this is a tracking issue, or is it something I am doing or not doing within the programmer?( I may be wrong) but cannot figue out why the 500's appear to be ghosting those gobos over the 2nd fader.

My second issue has to do with grabbing fixtures and creating a group. First off there is a group labeled "all 500's", which when accesed pulls up all six of our Mac 500's. Some of the macs come up in an open white with gobos and 2 or 3 come up in purple. I want to know how I can set all 6 mac's to have the same ICFB parameters. I have tried to grab all fixtures and set all parameters for ICFB, then record that into my group labeled "all 500's" but it is not working.

Finally, we have 6 Clay Paky Stagelight 300's that seem to be stuck in strobe mode. I grab all fixtures, set intensity to full, and see them start doing a bad bally/strobe effect. When I pig+beam the only feature I can access is intensity level on the encoder wheels. No pan, tilt, colours etc. How do I get control of these things and get them to stop strobbing and pointing at the sky??

Any help will be appreciated. My job is on the line here as we have Mcoy Tyner coming in for a show on Saturday, which leaves me tomorrow to program and figure this out. Even better, if you are avaliable or willing to do help over the telephone, I'd gladly give you a call and maybe we can work on it that way. A HUGE THANK YOU in advance to anyone that can lend me a hand here.

Thanks- Phil
Parents
  • 0
    The Clay Paky fixtures may have Intensity and Strobe functions on the same channel. 0-50 will be Intensity, 51-100 will be strobe. If you select the lights but do not press @ FULL. Instead use the encoder wheel to set the Intensity value.

    In order to get control of the colors or pan and tilt etc on the enocer wheels you will need to select the lights, then press the appropriate button to get the parameters on the encoders. There are buttons labeled FOCUS, COLOR, and BEAM which will bring these parameters onto the encoder wheels. You may have to press BEAM more than once to toggle through all of the different Beam parameters.
Reply
  • 0
    The Clay Paky fixtures may have Intensity and Strobe functions on the same channel. 0-50 will be Intensity, 51-100 will be strobe. If you select the lights but do not press @ FULL. Instead use the encoder wheel to set the Intensity value.

    In order to get control of the colors or pan and tilt etc on the enocer wheels you will need to select the lights, then press the appropriate button to get the parameters on the encoders. There are buttons labeled FOCUS, COLOR, and BEAM which will bring these parameters onto the encoder wheels. You may have to press BEAM more than once to toggle through all of the different Beam parameters.
Children
No Data
Related

www.etcconnect.com