hog 2 installation

hi all

I've got whole hog 2 with me
when I boot up it go straight into the 1,clean show 2, old show 3, load new software.

i don't know what happen but now it doesn't boot up normal anymore.

so I've download the latest version and unzip it into 2 diskette

so I attempt to load in a new sotware.
but it kept showing
'Loading....
Disk or program not found'

So I though I might have a bad floppy drive so I change another A Drive.
But still get the same result.

Please help~~~

What are the possibilities for the board to act like this?
I'm pretty sure the diskette are fine since they're new
Parents
  • 0
    [quote=Joe Bleasdale;39075]Has the desk been in any cases where the heat enviroment has been above normal? May be a bad example... But the reason I ask is that with Xbox 360 consoles, if you play them for a prolonged amount of time, there is a PCB in thier rear panel which was badly designed by microsoft and playing with no booster fan on the back (thats where the PCB is) will melt the solder. Subsequently, the Xbox has to be sent back to be re-soldered. Maybe there could be a similar case with this Hog 2?

    Regards,

    Joe,

    While the XBOX 360 might have this problem, this has never been a concern with any Wholehog 2 console. Please do not compare one company's mistakes to a situation that you know nothing about. Wholehog 2's have been used in very hot outdoor environments since they were developed and I am unaware of any console ever having melted solder.

    thanks,
Reply
  • 0
    [quote=Joe Bleasdale;39075]Has the desk been in any cases where the heat enviroment has been above normal? May be a bad example... But the reason I ask is that with Xbox 360 consoles, if you play them for a prolonged amount of time, there is a PCB in thier rear panel which was badly designed by microsoft and playing with no booster fan on the back (thats where the PCB is) will melt the solder. Subsequently, the Xbox has to be sent back to be re-soldered. Maybe there could be a similar case with this Hog 2?

    Regards,

    Joe,

    While the XBOX 360 might have this problem, this has never been a concern with any Wholehog 2 console. Please do not compare one company's mistakes to a situation that you know nothing about. Wholehog 2's have been used in very hot outdoor environments since they were developed and I am unaware of any console ever having melted solder.

    thanks,
Children
No Data
Related

www.etcconnect.com