Effects

Hello all,

I was just wondering if some one could explain how to write effects? Even if you cant, maybe a couple tips?

I am using the Hog IPC with hog 2 software.

I am also using 24 colorblasts, and want to write effects for those.

Thanks so much in advance

stjohnson90
Parents
  • 0
    Hello, page 81 of the Hog 2 manual explains using the Effects Engine.

    Basically you will select the fixtures.
    Press PIG+EFFECTS (from the right display) to open the Effects Engine.
    You can then select the TABLE column for the parameter you want to manipulate. Press SET and this will give you options to apply to the parameter.
    Adjust the RATE, SIZE, and OFFSET encoders to your liking.

    You can then record the selected values into the Effects Directory just like you would record a palette.
Reply
  • 0
    Hello, page 81 of the Hog 2 manual explains using the Effects Engine.

    Basically you will select the fixtures.
    Press PIG+EFFECTS (from the right display) to open the Effects Engine.
    You can then select the TABLE column for the parameter you want to manipulate. Press SET and this will give you options to apply to the parameter.
    Adjust the RATE, SIZE, and OFFSET encoders to your liking.

    You can then record the selected values into the Effects Directory just like you would record a palette.
Children
No Data
Related

www.etcconnect.com