Pig Time

Real simple request here. For Hog 1k, 2, and 3

I would like to program my fade time for a group of fixtures from one position to another using an offset value for each fixture from the middle pair to the outside pair.

Using pig time and setting a 1 pig thru 5 on my position parameter gets my snake going on the group but just from one side of my rig to the other. I cant seem to get my symmetrical look going.

Also doing similar effects with odds and evens and other groups as well would be great.

Much thanks,

Morehaze
Parents
  • 0
    I am pretty sure you can accomplish your request by doing this:

    1) Put fixtures in their respective positions
    2) 101
    3) Press time button to bring up fade time on encoder toolbar
    4) Hold down fan key and select the center option from the options toolbar
    5) Keep holding the fan key and start dial up the fade time encoder a bit

    This will fan the fade times of the fixtures from the center to the outside.
Reply
  • 0
    I am pretty sure you can accomplish your request by doing this:

    1) Put fixtures in their respective positions
    2) 101
    3) Press time button to bring up fade time on encoder toolbar
    4) Hold down fan key and select the center option from the options toolbar
    5) Keep holding the fan key and start dial up the fade time encoder a bit

    This will fan the fade times of the fixtures from the center to the outside.
Children
No Data
Related

www.etcconnect.com