Pig Time

Real simple request here. For Hog 1k, 2, and 3

I would like to program my fade time for a group of fixtures from one position to another using an offset value for each fixture from the middle pair to the outside pair.

Using pig time and setting a 1 pig thru 5 on my position parameter gets my snake going on the group but just from one side of my rig to the other. I cant seem to get my symmetrical look going.

Also doing similar effects with odds and evens and other groups as well would be great.

Much thanks,

Morehaze
Parents
  • 0
    Thanks Chris,
    this works with Hog 3 indeed but I can only get it to fan with the center option from the inside out and not the opposite. Also fanning makes the spread to coarse. I just do the effect as mentioned above.
    Is there a way to adjust the fanning spread?
    Also could you tell me how to adjust the path parameters?
    Example, when I advance cues and I use over as my path, can I adjust how much over my parameters go and at what rate throughout the path??? It would be cool if you could use multiple paths like over and damped together.
    Many thanks,
    Josh
Reply
  • 0
    Thanks Chris,
    this works with Hog 3 indeed but I can only get it to fan with the center option from the inside out and not the opposite. Also fanning makes the spread to coarse. I just do the effect as mentioned above.
    Is there a way to adjust the fanning spread?
    Also could you tell me how to adjust the path parameters?
    Example, when I advance cues and I use over as my path, can I adjust how much over my parameters go and at what rate throughout the path??? It would be cool if you could use multiple paths like over and damped together.
    Many thanks,
    Josh
Children
No Data
Related

www.etcconnect.com