replacing wash fixtures in a show

Hi

i have a show that runs on a Hog IPC running Hog 2 os. The show has 46 mac600nt's that need to be replaced with Mac700 wash fixtures. Just checking a theory..... can i write a profile for the 700's so the ipc still thinks they are 600nt's so i don't have to reprogram?

thanks
Parents
  • 0
    Ok,
    if you have the time and don't have the show clone macro.
    You can manually clone your show.
    Start by cloning your pallettes.
    For example
    load colour pallette 1
    201 thru 246(Mac 700 wash's) pig copy(which is clone from) 101 thru 146(your Mac 600's) enter update.
    You have now cloned pallette 1.
    You need to do this for every pallette you have you used in the show.

    Then start with your cuelists.Same syntax
    load cue 1,group 1 (mac700) pig copy (group2) enter update.

    The macros that are being talked about use groups to automate the button pushs and automatically load entire selected cuelists.

    I reckon three hours and you will be done.

    Cormac
Reply
  • 0
    Ok,
    if you have the time and don't have the show clone macro.
    You can manually clone your show.
    Start by cloning your pallettes.
    For example
    load colour pallette 1
    201 thru 246(Mac 700 wash's) pig copy(which is clone from) 101 thru 146(your Mac 600's) enter update.
    You have now cloned pallette 1.
    You need to do this for every pallette you have you used in the show.

    Then start with your cuelists.Same syntax
    load cue 1,group 1 (mac700) pig copy (group2) enter update.

    The macros that are being talked about use groups to automate the button pushs and automatically load entire selected cuelists.

    I reckon three hours and you will be done.

    Cormac
Children
No Data
Related

www.etcconnect.com