i have 3 fixtures that i made profiles for using the hog 2 library editor. all controls work as they should with the exception of, if i take the grand master out the intensity does not change on the 3 fixtures. same with the intesity control of the fader. could this be the difference between htp and ltp? or is the syntax wrong on my profile.
Two things to check. Yes....make sure your profile is set to: "type = htp8bit" (unless you have a 16bit dimmer)
And that you have a true intensity parameter (not beam or colour for example) via: "parameter = Intensity" and "kind = +" (this shouldn't be necessary with Intensity specifically, but it will make sure)
Two things to check. Yes....make sure your profile is set to: "type = htp8bit" (unless you have a 16bit dimmer)
And that you have a true intensity parameter (not beam or colour for example) via: "parameter = Intensity" and "kind = +" (this shouldn't be necessary with Intensity specifically, but it will make sure)
