Color Force 12 on hog 1k

I tried building a profile to run the color forces in mode 5. My profile was an epic fail and I was wondering if anyone here could help me with it. This is what I have so far and it was created in the software everyone here recommends. None of the color wheels work properly and the strobe has the intensity built in. I have built other profiles that work perfect but I cannot figure out what I am doing wrong on this one.

version = 40
Count = 1

//-------------------------------------------------------
fixture = LED
manufacturer = 88
product = 15
name = Color Force 12
yoke = no

//


output = dmx

parameter = Strobe
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 255,%

parameter = Red
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 255,%

parameter = Green
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 255,%

parameter = Blue
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 255,%
Parents Reply Children
No Data
Related