Hog 2 console

Hello everyone,

i have a hog 2 console i am currently trying to diagnose in my shop
the top or MK 3 panel does not seem to be powering up so i get no LCD
screens as well as n button lights at all, so i have pretty much figured that the board should be deemed deceased at this point. any ideas as to what may be causing such an issue? please Help...

Thanks Amber R.....
Parents
  • Hi, there are many possibilities. For example if the front panel is not getting power, it may be the power supply, or a power cable possibly. There is a sticker on the inside of the Hog 2 detailing what you should measure on each of the conductors coming off the power supply. If the PCB is getting power but just not showing any signs of life, a component on one of the two PCBs may have failed, or there may be a damaged trace on one of the two PCBs. It will take someone some time trouble shooting the console to determine the exact cause of the problem.
Reply
  • Hi, there are many possibilities. For example if the front panel is not getting power, it may be the power supply, or a power cable possibly. There is a sticker on the inside of the Hog 2 detailing what you should measure on each of the conductors coming off the power supply. If the PCB is getting power but just not showing any signs of life, a component on one of the two PCBs may have failed, or there may be a damaged trace on one of the two PCBs. It will take someone some time trouble shooting the console to determine the exact cause of the problem.
Children
No Data
Related