I just bought a Hog 2 on ebay and as I wait for it to arrive I am wondering if this is still a useable board? I have a jazz club with about 50 various light including some moving heads.
Create a new show on the console. Save to a floppy. There will now be a lib.lib file on the floppy.
You'll need a Windows machine and a Floppy drive that is either built in or external. You need to add the profiles to the lib.lib file. You can open the lib.lib with notepad or a basic text editor.
or you can use the fixture builder at: www.lightingapps.de It'll create the lib.lib for you to load on the console.
Check the manual for specifics and the formatting.
Create a new show on the console. Save to a floppy. There will now be a lib.lib file on the floppy.
You'll need a Windows machine and a Floppy drive that is either built in or external. You need to add the profiles to the lib.lib file. You can open the lib.lib with notepad or a basic text editor.
or you can use the fixture builder at: www.lightingapps.de It'll create the lib.lib for you to load on the console.
Check the manual for specifics and the formatting.
