• State Not Answered
  • Date
    sbarnes
  • Date
  • Replies 11 replies
  • Subscribers 5 subscribers
  • Views 1023 views
  • Users 0 members are here

DP boot up

I'm still having days where the DP does not load show data upon console boot up. It just continues to read "Intializing..." but never gets to loading show. I wait about 4 or 5 minutes and then just restart the console. This is not every day, and it's not with every show file I create, but I'd say it's happened two or three times since buld 956 came out.

Wholehog 3 v1.3.8.6 (b956)
(2) DP2000s in network hub (only #1 has any patching right now)
Parents
  • 0
    D-Link DSH-8 port Hub
    Standard Cat5 from console to hub.
    Standard Cat5 from DP2000 #1 to hub.
    Standard Cat5 from DP2000 #2 to hub.

    All work fine. No problems throughout the day of programming. It's just every once and a while boot up does not complete first thing in the morning and I'm left to restart the console. I think in the past I've hard reset the DP but that didn't seem to work.
Reply
  • 0
    D-Link DSH-8 port Hub
    Standard Cat5 from console to hub.
    Standard Cat5 from DP2000 #1 to hub.
    Standard Cat5 from DP2000 #2 to hub.

    All work fine. No problems throughout the day of programming. It's just every once and a while boot up does not complete first thing in the morning and I'm left to restart the console. I think in the past I've hard reset the DP but that didn't seem to work.
Children
No Data
Related

www.etcconnect.com