DP boot up

I'm still having days where the DP does not load show data upon console boot up. It just continues to read "Intializing..." but never gets to loading show. I wait about 4 or 5 minutes and then just restart the console. This is not every day, and it's not with every show file I create, but I'd say it's happened two or three times since buld 956 came out.

Wholehog 3 v1.3.8.6 (b956)
(2) DP2000s in network hub (only #1 has any patching right now)
Parents
  • I've been having a similiar problem in our arena. We have a DP and timecode processor on the network that stay on all the time, just the console is shut down. When I reboot the console for the next show the processor's don't initiliaze. I usually have to give them a hard reset before they will find the server. The network has a Cisco catalyst switch. All software is up to date, the processors just won't log on if the console has been off for more than a few hours.
Reply
  • I've been having a similiar problem in our arena. We have a DP and timecode processor on the network that stay on all the time, just the console is shut down. When I reboot the console for the next show the processor's don't initiliaze. I usually have to give them a hard reset before they will find the server. The network has a Cisco catalyst switch. All software is up to date, the processors just won't log on if the console has been off for more than a few hours.
Children
No Data
Related