Group effect master

OK let put it this way. If I have a cuelist running, let's say list1 cue 1, and in the cue istelf i've got an effect running, right now I don't have the ability to control the size of the effect of a certain group but bringing back the effect into the programmer and consequently adjusting, let's say, the size. if I had a fader controlling the effect for a certain group it would certainly be quicker and easier. it might be achieved by giving the GROUP MASTER(inhibitive master) a second function such as the EFFECT MASTER. PIG+CHOOSE might be the sintax to toggle between group master and group effect master or the play button might be the group master and the pause button might be the group effect master. thanks a lot Marco Belloni
Parents
  • 0
    Hi Marco,

    I may have a workaround for this (my post might not be at 100% complete, as I am not yet in front of my Desk, but managed to get a similar feature)

    What I did was creating a Scene onto an IPCB Fader. The Scene only had the Effect Parameter recorded, and in this only the size and/or speed.

    So I was able to have the effect controlled over Faders.

    I hope it is correct what I said, otherwise I can try to reproduce the exact steps at home, and either sent you how i did it or a show.

    Jhust let me know,
Reply
  • 0
    Hi Marco,

    I may have a workaround for this (my post might not be at 100% complete, as I am not yet in front of my Desk, but managed to get a similar feature)

    What I did was creating a Scene onto an IPCB Fader. The Scene only had the Effect Parameter recorded, and in this only the size and/or speed.

    So I was able to have the effect controlled over Faders.

    I hope it is correct what I said, otherwise I can try to reproduce the exact steps at home, and either sent you how i did it or a show.

    Jhust let me know,
Children
No Data
Related

www.etcconnect.com