"Set"-ing wheel values

Hey, it would be really great if we had the ability to type a wheel value directly via "Set" as a quicker way of getting the right value.

i.e. for Catalyst hold "Set" + touch wheel for "Library" or "File", then type the value rather than having to turn the wheel all the way to the right file number.

This could be useful for many other parameters too, CMY values, Focus/Zoom values.....
Parents
  • 0
    [quote=pepijn]A bit off topic,
    I'm working on an opera with a bunch of vl1000as fixtures. The desiner uses the framing system a lot! the blade's are seperated in 4 blade's with a 'motor A' and a 'motor B'. If i want to edit the spreadsheet cells i can only adit the 'motor A' values....
    Is there a way to edit the 'motor B' or is this a bug?

    Grtz, Pepijn

    PS Hog III, 1 DP2000. sw 1.3.8 (1014)
    Pepijn,

    In dealing with VL1000's, I have a dedicated page that puts each motor on a fader for all fixtures (8 faders total). That way I can use the faders to set the shutter cut, touch the fixtures and record the pallette that way. It's a quick way to deal with the shutters.

    Hope it helps....
    j
Reply
  • 0
    [quote=pepijn]A bit off topic,
    I'm working on an opera with a bunch of vl1000as fixtures. The desiner uses the framing system a lot! the blade's are seperated in 4 blade's with a 'motor A' and a 'motor B'. If i want to edit the spreadsheet cells i can only adit the 'motor A' values....
    Is there a way to edit the 'motor B' or is this a bug?

    Grtz, Pepijn

    PS Hog III, 1 DP2000. sw 1.3.8 (1014)
    Pepijn,

    In dealing with VL1000's, I have a dedicated page that puts each motor on a fader for all fixtures (8 faders total). That way I can use the faders to set the shutter cut, touch the fixtures and record the pallette that way. It's a quick way to deal with the shutters.

    Hope it helps....
    j
Children
No Data
Related

www.etcconnect.com