So we've got DPs...any thought of an ArtNet Processor?
Similar to a DP it could connect to the Hog-3 Network via switch and send multiple lines of ArtNet out...no need for all manner of 3rd party hardware converting DMX from the DP to ArtNet.
Well sure, pure ArtNet out of the desk would probably be a big load for it to handle.
What I imagine is another rack mount unit similar to a DP, it could have its own processor as well, so the load is at the "AP" and the desk drives it similarly to a DP.
It could even take the place of a DP if all you needed was ArtNet.
Connect direct to the desk via crossover cable, or go right into a network switch along with your DPs.
You're just changing the output protocol right?:confused:
This way when you've got a bunch of ArtNet lines on a show you dont' have to eat up DMX space from DPs.
Well sure, pure ArtNet out of the desk would probably be a big load for it to handle.
What I imagine is another rack mount unit similar to a DP, it could have its own processor as well, so the load is at the "AP" and the desk drives it similarly to a DP.
It could even take the place of a DP if all you needed was ArtNet.
Connect direct to the desk via crossover cable, or go right into a network switch along with your DPs.
You're just changing the output protocol right?:confused:
This way when you've got a bunch of ArtNet lines on a show you dont' have to eat up DMX space from DPs.
