Controlling the Hog III with Crestron

I was wondering if anyone has experience controlling the Hog III with a control system like Crestron. I know that Crestron makes a MIDI expansion card for its processors, but a MIDI cable run is not always feasable.

Will the Hog III accept MIDI over ethernet without the MIDI/Timecode processor? Are there such thing as an ethernet to MIDI adapter?

Thanks!
Parents
  • 0
    Amir,

    It's been a long time since I used an ESP II, so this may not be completely accurate.

    Based on the information I have and what little I remember, the ESP II is only capable of sending MIDI notes. Unfortunately, the Wholehog 3 does not het have a full implementation of MIDI notes. This is something we plan on adding and is currently logged as feature request #9052.

    The Wholehog 3 will respond to a full set of MIDI Show Control (MSC) commands, so with the current software version you could connect to a different console that can send MSC commands and use this to play and release cuelists, among other functions.
Reply
  • 0
    Amir,

    It's been a long time since I used an ESP II, so this may not be completely accurate.

    Based on the information I have and what little I remember, the ESP II is only capable of sending MIDI notes. Unfortunately, the Wholehog 3 does not het have a full implementation of MIDI notes. This is something we plan on adding and is currently logged as feature request #9052.

    The Wholehog 3 will respond to a full set of MIDI Show Control (MSC) commands, so with the current software version you could connect to a different console that can send MSC commands and use this to play and release cuelists, among other functions.
Children
No Data
Related

www.etcconnect.com