Controlling the Hog III with Crestron

I was wondering if anyone has experience controlling the Hog III with a control system like Crestron. I know that Crestron makes a MIDI expansion card for its processors, but a MIDI cable run is not always feasable.

Will the Hog III accept MIDI over ethernet without the MIDI/Timecode processor? Are there such thing as an ethernet to MIDI adapter?

Thanks!
Parents
  • 0
    Tony,

    If you have access to the private sections of the Crestron web site, then you certainly can get to some of the good info that I can't access. I'd see if you can search for anything on their private site that documents how to use simpl to build and send MIDI strings.

    The only thing that I found that actually had examples for setting up modules was this link that was specific to the CNX processors is here:

    www.crestron.com/downloads/pdf/product_manuals/cnxmidi.pdf
Reply
  • 0
    Tony,

    If you have access to the private sections of the Crestron web site, then you certainly can get to some of the good info that I can't access. I'd see if you can search for anything on their private site that documents how to use simpl to build and send MIDI strings.

    The only thing that I found that actually had examples for setting up modules was this link that was specific to the CNX processors is here:

    www.crestron.com/downloads/pdf/product_manuals/cnxmidi.pdf
Children
No Data
Related

www.etcconnect.com