Could it be possible to have Frame1A and frame 1B on same wheel: Wheel1=Frame 1A and Pig+wheel1=Frame 1B, with this option you could have 4 frames on same wheels page.
[quote=teerickson] 1) Pig + Encoder is already implemented as fine resolution control mode. People expect it to work that way when programming, regardless of what type of parameter they are controlling. Perhaps with control, set, or back, next ?
[quote=teerickson] 3) Would there be any advantage to having the encoder wheel control both 1a and 1b at once so you have an easy way of moving the shutter straight in and out? This would possibly require 2 separate modifier keys for 1a and 1b, but when I think about what I usually do when I'm working with lights that have shutter systems, I usually run the frame straight in until I'm close to where I need to be, then I adjust the angle.
same than marty, because on Clay paky using 1a and 1b together is great, but it must be 2 closes keys
[quote=teerickson] 1) Pig + Encoder is already implemented as fine resolution control mode. People expect it to work that way when programming, regardless of what type of parameter they are controlling. Perhaps with control, set, or back, next ?
[quote=teerickson] 3) Would there be any advantage to having the encoder wheel control both 1a and 1b at once so you have an easy way of moving the shutter straight in and out? This would possibly require 2 separate modifier keys for 1a and 1b, but when I think about what I usually do when I'm working with lights that have shutter systems, I usually run the frame straight in until I'm close to where I need to be, then I adjust the angle.
same than marty, because on Clay paky using 1a and 1b together is great, but it must be 2 closes keys
