Could it be possible to have Frame1A and frame 1B on same wheel: Wheel1=Frame 1A and Pig+wheel1=Frame 1B, with this option you could have 4 frames on same wheels page.
Some Lamps have shutters with 2 channels, one for the position, the second one for the angle. Other lamps have 2 channels, one for each side of the shutter blade. So you'd push in one side of the shutter a little further than the other side to move the angle.
What would be needed is a abstration layer, so you'd push in a shutter blade with the first wheel and have the angle on the next wheel. The desk would have to take care for those lamps, that do not have the angle separated but have just 2 channels for the sides of the shutter... Of course this should (at some time) be calibrated so you'd exchange a VL1000AS for a mac2k performance and not only the head position and colors but also the shutter blade-palettes match...
Some Lamps have shutters with 2 channels, one for the position, the second one for the angle. Other lamps have 2 channels, one for each side of the shutter blade. So you'd push in one side of the shutter a little further than the other side to move the angle.
What would be needed is a abstration layer, so you'd push in a shutter blade with the first wheel and have the angle on the next wheel. The desk would have to take care for those lamps, that do not have the angle separated but have just 2 channels for the sides of the shutter... Of course this should (at some time) be calibrated so you'd exchange a VL1000AS for a mac2k performance and not only the head position and colors but also the shutter blade-palettes match...
