Lock Console / Screen Saver

Hi,

I already discussed these feature a time ago, but noticed again this weekend that they may be vital :)

The first one is having a possibilty to lock the console, and unlock it again by entering, for example a pin code. This locking may lock all the features of the console, so no output to the rigg, no interaction with the console.

The second one is having a timeout to be set where the screens will switch off until a key is pressed again. This will prevent burn-in. I have disabled the powerlock on the screens, and I switch them off when I leave for a certain time, but, if the power drops, the desk will boot up again, and they will stay on for x time.
Parents
  • 0
    Okay great :) Also I guess what would be good would be to have a blank screen (or softpowerdown of the screens) when, for example, the desk lights go to blue, when it is not used for x minutes. because having the LEDs dimmed to blue is nice, but if the screens are still on at that moment, the FOH is not darker :) Also perhaps, if this timeout occurs, the blue LEDs come up,option for the screen to blank/go off and that the desk will lock automaticly, so a pin is needed. That would be nice.

    Forgot to mention: the autolock of the desk if case of no use for x time should be an option too.
Reply
  • 0
    Okay great :) Also I guess what would be good would be to have a blank screen (or softpowerdown of the screens) when, for example, the desk lights go to blue, when it is not used for x minutes. because having the LEDs dimmed to blue is nice, but if the screens are still on at that moment, the FOH is not darker :) Also perhaps, if this timeout occurs, the blue LEDs come up,option for the screen to blank/go off and that the desk will lock automaticly, so a pin is needed. That would be nice.

    Forgot to mention: the autolock of the desk if case of no use for x time should be an option too.
Children
No Data
Related

www.etcconnect.com