• State Not Answered
  • Date
    rautasami
  • Date
  • Replies 18 replies
  • Subscribers 5 subscribers
  • Views 1358 views
  • Users 0 members are here

Flash -> to programmer

I think there are consoles on the market which have the same kind of feature...

but in theatre enviroment it would be very useful if you could have for example an option for flash button...

Flash pressed -> intensity value goes directly to programmer and follows the fader until flash is released.
Flash released -> fader works normally
Parents
  • 0
    "Suck" is the easiest way I would think.

    ie Group 1 Suck

    Will bring the values into the prgrammer.

    Just make HTP masters for your LD on the wing that correspond to Groups and you'll be all set to go.:)

    Additionally you can make a master inhibitive if you Move the Group directly onto an empty fader.;)

    Live Suck will bring all active values into the Programmer (Like Active Enter on H2)

    Live (Pallete) will bring any fixtures currently using that Pallete into the programmer

    Same for Live (Value). ie Intensity value: Live 50%

    There's plenty more info in the manual - Section 18: Advanced Programming.

    Hope this is helpful:D
Reply
  • 0
    "Suck" is the easiest way I would think.

    ie Group 1 Suck

    Will bring the values into the prgrammer.

    Just make HTP masters for your LD on the wing that correspond to Groups and you'll be all set to go.:)

    Additionally you can make a master inhibitive if you Move the Group directly onto an empty fader.;)

    Live Suck will bring all active values into the Programmer (Like Active Enter on H2)

    Live (Pallete) will bring any fixtures currently using that Pallete into the programmer

    Same for Live (Value). ie Intensity value: Live 50%

    There's plenty more info in the manual - Section 18: Advanced Programming.

    Hope this is helpful:D
Children
No Data
Related

www.etcconnect.com