• State Not Answered
  • Date
    rautasami
  • Date
  • Replies 18 replies
  • Subscribers 5 subscribers
  • Views 1360 views
  • Users 0 members are here

Flash -> to programmer

I think there are consoles on the market which have the same kind of feature...

but in theatre enviroment it would be very useful if you could have for example an option for flash button...

Flash pressed -> intensity value goes directly to programmer and follows the fader until flash is released.
Flash released -> fader works normally
Parents
  • 0
    [quote=Marty Postma]"Suck" is the easiest way I would think.

    ie Group 1 Suck

    Will bring the values into the prgrammer.



    Yep...but I don't want to bring zero values... and Live / Group # Suck is too much to type :p


    [quote=Marty Postma]
    Just make HTP masters for your LD on the wing that correspond to Groups and you'll be all set to go.:)

    Additionally you can make a master inhibitive if you Move the Group directly onto an empty fader.;)


    Yes...but that makes two sets of faders...and a nice mess by LD... :)
Reply
  • 0
    [quote=Marty Postma]"Suck" is the easiest way I would think.

    ie Group 1 Suck

    Will bring the values into the prgrammer.



    Yep...but I don't want to bring zero values... and Live / Group # Suck is too much to type :p


    [quote=Marty Postma]
    Just make HTP masters for your LD on the wing that correspond to Groups and you'll be all set to go.:)

    Additionally you can make a master inhibitive if you Move the Group directly onto an empty fader.;)


    Yes...but that makes two sets of faders...and a nice mess by LD... :)
Children
No Data
Related

www.etcconnect.com