block + unblock

Amm....sorry for that but someone can tell me what is the block and the unblock cue, and how to do that? i spend all day on that and its seems that noting happen

I know I know...beginners question but i dont know what is that :1zhelp:
I know this is important tool so...

And by the way, the Flying Pig/ High-End bag is cool and the pen to...remaind me the console light :), Thanks. (maybe the next gift will be an Expension Wing! :09:)


Amir
Parents
  • 0
    Amir,

    Hillary is correct that there are a couple of scenarios where unblock doesn't work properly, but you should see it unblocking. Try creating a new cuelist with some fixture data in cue 1. Copy cue 1 to cue 2, then type Cue 2 Unblock Enter. This should remove all of the hard values in cue 2. If you open cue 2 in an editor and turn off Show State, it shouldn't have any data. You should also see that it doesn't have a fade time in the cuelist window since it doesn't have any parameters.

    I hope this helps.
Reply
  • 0
    Amir,

    Hillary is correct that there are a couple of scenarios where unblock doesn't work properly, but you should see it unblocking. Try creating a new cuelist with some fixture data in cue 1. Copy cue 1 to cue 2, then type Cue 2 Unblock Enter. This should remove all of the hard values in cue 2. If you open cue 2 in an editor and turn off Show State, it shouldn't have any data. You should also see that it doesn't have a fade time in the cuelist window since it doesn't have any parameters.

    I hope this helps.
Children
No Data
Related

www.etcconnect.com