Wholehog 3 wireless connection

We've got Wholehog 3 with ethernet connection with DMX processor.
Now we've got a necessaty to connect its through an air, because where is no possibility to use a cable (a water stage). The distance is 100 meters. We use linksys wireless bridges (802.1 b&g) and directed antenas. It works well until you connect Wholehog 3. Ping increase from 1 ms till 1500-3000 ms.
How to solve this problem? Is it possible to use wireless bridges in this system?
Parents
  • 0
    I've just spent the past week using wireless for programming 2 DP's from the studio floor reverting back to cable for recordings in the control room. This worked very well overall but I was probably not more than a distance of around 50-70m from the transmitter. Every now and then the network error symbol would pop up on the console dock but did not really have any effect I could notice beyond that. The key appeared to be location/signal strength when starting the console server from where I was able to upload software to the DP's easily.

    Ross
Reply
  • 0
    I've just spent the past week using wireless for programming 2 DP's from the studio floor reverting back to cable for recordings in the control room. This worked very well overall but I was probably not more than a distance of around 50-70m from the transmitter. Every now and then the network error symbol would pop up on the console dock but did not really have any effect I could notice beyond that. The key appeared to be location/signal strength when starting the console server from where I was able to upload software to the DP's easily.

    Ross
Children
No Data
Related

www.etcconnect.com