Goto + Timings

Hi, I would like to ask for the command Goto Cue X Time Y Enter and it will run the cue X in time Y. I think this will work very well for theatre shows because sometimes, you just want to skip to a cue in a specific time rather than the original time set in the cuelist.

Eg. Like sneaking a bump cue in 5sec because the stage manager has just missed the cue. And you need that cue because it presets movers and scrollers.

Thank you!!!
Parents
  • 0
    Steph, thanks for replying. I know abt the recording time in palette. It's pig+blind that you are talking about right for the try cue function? I thought pig+clear is to recall the programmer of what you just cleared.

    I was hoping for some commands to fade palette changes. Because, when running shows on the fly, sometimes you would want to use a palette with few timings at different moments. A fader to control timings is good too. Can we have both commands and fader??? :D
Reply
  • 0
    Steph, thanks for replying. I know abt the recording time in palette. It's pig+blind that you are talking about right for the try cue function? I thought pig+clear is to recall the programmer of what you just cleared.

    I was hoping for some commands to fade palette changes. Because, when running shows on the fly, sometimes you would want to use a palette with few timings at different moments. A fader to control timings is good too. Can we have both commands and fader??? :D
Children
No Data
Related

www.etcconnect.com