timecode jog

Hi,

Is it possibel to get the following function when working with timecode

when the wait time is allready set to a timecode point for specefic cues and the time has to be adjusted fo a cue pressing set in the wait collom gives me the option to enter a new time (allready there) I would also like to see the timecode on one of the wheels so i can jog forward and back without typing a new number
Parents
  • 0
    FYI
    Shift of timecode of two or more Cue
    1. Open → Choose : open the Cuelist window.
    2. Click and drag to select the Wait cells for the range of cues you want
    to edit.
    3. Press Set.
    4. Edit the timecode value of the first cell then press Enter. All the selected
    timecode values will be adjusted by the same amount of time added
    or subtracted from the first value.

    Manual_en101006.pdf
    Page306
    Thanks,
    Akito
Reply
  • 0
    FYI
    Shift of timecode of two or more Cue
    1. Open → Choose : open the Cuelist window.
    2. Click and drag to select the Wait cells for the range of cues you want
    to edit.
    3. Press Set.
    4. Edit the timecode value of the first cell then press Enter. All the selected
    timecode values will be adjusted by the same amount of time added
    or subtracted from the first value.

    Manual_en101006.pdf
    Page306
    Thanks,
    Akito
Children
No Data
Related

www.etcconnect.com