Effect chase

Ok, i read the manual and i got alot of information out of it,
Now, there is an effect i cant seem to get the grasp of.

I want to do a light chase, 1 to 6 on the back bar.
and then alternating, IE: 2 to 6 to 4 to 2 to 5 to 1
or 2 and 6 and 4 and 3 and 5 and 1

thanks,
Parents
  • 0
    Hi, Tom
    60, 30, 0, 0, 30, 60 is the good answer :dunce:
    If you know the numeric offsets that you want like this, you should be able to use multipart fanning directly in the offset cell with 60>0>60 syntax


    This would be when we want to use your solution with something like a center fan. (I'm working with a designer that only want symmetricals effects)
    If we want to use Spread or Percent and we don't know what will be the numeric offsets to have one solution to do a center fan.
    At this time i see two options
    1) 180>0>180 or 50%>0%>50% for Spread or Percent value
    2) Spread and Percent take into account the fan option witch is actived.

    What do you think of that?
Reply
  • 0
    Hi, Tom
    60, 30, 0, 0, 30, 60 is the good answer :dunce:
    If you know the numeric offsets that you want like this, you should be able to use multipart fanning directly in the offset cell with 60>0>60 syntax


    This would be when we want to use your solution with something like a center fan. (I'm working with a designer that only want symmetricals effects)
    If we want to use Spread or Percent and we don't know what will be the numeric offsets to have one solution to do a center fan.
    At this time i see two options
    1) 180>0>180 or 50%>0%>50% for Spread or Percent value
    2) Spread and Percent take into account the fan option witch is actived.

    What do you think of that?
Children
No Data
Related

www.etcconnect.com