Does anybody know how to randomize effect macros? :17: I know how to get the effect.. but all the lights move the same way, how do i make each light move randomly from each other?
The best way to achieve this is to FAN the OFFSET of the effect.
For example, if you want to "randomize" a Pan/Tilt effect you could select your fixtures, open the effects engine, put a sine wave on pan and tilt, and then FAN the OFFSET of the effect by holding down the FAN button and turning the encoder wheel that is labeled "effects offset". Alternatively you can fan the offset by selecting the offset cell in the effects window and entering a range of values such as 1>180.
The help manual has a more detailed description of what can be achieved using fanning in section 15.4.
The best way to achieve this is to FAN the OFFSET of the effect.
For example, if you want to "randomize" a Pan/Tilt effect you could select your fixtures, open the effects engine, put a sine wave on pan and tilt, and then FAN the OFFSET of the effect by holding down the FAN button and turning the encoder wheel that is labeled "effects offset". Alternatively you can fan the offset by selecting the offset cell in the effects window and entering a range of values such as 1>180.
The help manual has a more detailed description of what can be achieved using fanning in section 15.4.
