• State Not Answered
  • Date
    velda - Former HES Forum Member
  • Date
  • Replies 3 replies
  • Subscribers 5 subscribers
  • Views 277 views
  • Users 0 members are here

rate wheel enable/dissable?

The rate wheel on the hog im using right now (Hog III v2.0) isnt working. Ive looked through the control and preference pannels as well as searched around the manual and i cant seem to find an option anywhere to enable or dissable it.

Am i missing this option or is my rate wheel toast?
Parents
  • 0
    You are correct in that there is not an option to enable/disable the rate wheel.

    If your rate wheel is not working (during a crossfade pull back or push forward on the rate wheel to manually override fade time), you could check its connection to the front panel PCB. If you remove the front panel you will see a white header on the under side of the PCB which goes from the rate wheel to the front panel itself.

    Hope this helps. Feel free to give us a call if you are still having issues.
Reply
  • 0
    You are correct in that there is not an option to enable/disable the rate wheel.

    If your rate wheel is not working (during a crossfade pull back or push forward on the rate wheel to manually override fade time), you could check its connection to the front panel PCB. If you remove the front panel you will see a white header on the under side of the PCB which goes from the rate wheel to the front panel itself.

    Hope this helps. Feel free to give us a call if you are still having issues.
Children
No Data
Related

www.etcconnect.com