For soem reason the library I have for my MAC 550s Extended won't spin the 2nd Gobo wheel. I was wondering if I update to a library with this implemented, will it screw up the programming I already have?
Normally you need to see whatever Gobo wheel it is that you want to spin and touch the screen above the encoder wheel to change from "Slots" to "Spin".
However this does seem to be missing from the 550 profile for some reason.
You should post this under the Library Requests section so Steve can get this fixed.
Normally you need to see whatever Gobo wheel it is that you want to spin and touch the screen above the encoder wheel to change from "Slots" to "Spin".
However this does seem to be missing from the 550 profile for some reason.
You should post this under the Library Requests section so Steve can get this fixed.
