Hog3PC Aligning Touch Screens

Hi folks:

I have a nasty feeling that I'm missing something obvious here, but i cant find it. I need to align the Hog3PC app to my touchscreens on my lighting station.

In the manual (on page 318 of the current edition) it shows the touchscreen button on the hog3pc starting screen (next to control panel and software update) but my panel only has the control panel button - and i cant find another align function. I have used the software that came with the screens (they are older ELO screens) but its off by a bit an is a bit tough to use (although workable).

Am I missing something here or is it not available on the hog3pc

TIM

Parents

0 woodj32177 - Former HES Forum Member over 18 years ago

In Hog PC,
You will have to use the calibrations software included with the monitor,
Hog PC just uses the Touchscreens as a mouse, There is no extra interaction between the computer and Hog 3 PC.

As for aligning the screens, are the always off a bit in the same direction?
A bit low, or high.....
You could calibrate the screen, touching the screen off by a bit to counteract the little bit the screen is off.

Good Luck!
Joshua Wood

Reply

0 woodj32177 - Former HES Forum Member over 18 years ago

In Hog PC,
You will have to use the calibrations software included with the monitor,
Hog PC just uses the Touchscreens as a mouse, There is no extra interaction between the computer and Hog 3 PC.

As for aligning the screens, are the always off a bit in the same direction?
A bit low, or high.....
You could calibrate the screen, touching the screen off by a bit to counteract the little bit the screen is off.

Good Luck!
Joshua Wood

Children

No Data