• State Not Answered
  • Date
    rautasami
  • Date
  • Replies 10 replies
  • Subscribers 5 subscribers
  • Views 547 views
  • Users 0 members are here

Blade flip

Hog3 has many features which can ease the pain of programming and cause I think everything is possible with software, this idea came to my mind.

Blade flip&rotate

For example if you have made something like this with blades of VL1000


/_\

it would be nice to be able to transfer the values easily from blade to blade so that the pattern turns 90 degrees or 180 degrees.

Does this make any sense?
Parents
  • 0
    if my memory serves me right. i think the only problem with this is that this technology is beeing built differently from manufactor to manufactor.. as an example:
    -on a mac 2000: blade parameter 1 is "how long into the beam the blade is, and parameter two controls the angle..

    -On a VL1000: blade parameter 1 controls how long into the beam the left side of the blade is, parameter 2 controls the right side af the blade..

    so i think it's hard to make a routine for this..

    -but a good idea, so if it's doable, go ahead;)
Reply
  • 0
    if my memory serves me right. i think the only problem with this is that this technology is beeing built differently from manufactor to manufactor.. as an example:
    -on a mac 2000: blade parameter 1 is "how long into the beam the blade is, and parameter two controls the angle..

    -On a VL1000: blade parameter 1 controls how long into the beam the left side of the blade is, parameter 2 controls the right side af the blade..

    so i think it's hard to make a routine for this..

    -but a good idea, so if it's doable, go ahead;)
Children
No Data
Related

www.etcconnect.com