Bug Report (1809)

Hey,

3 bugs left in the console :

- The High/Low light Pallete function don't work good (don't know if its only on that version, dont have problems with it in past one)

- The effect stop in a cuelist don't act like it shuled if you try to stop it with timing: sey all in colour effect cue 1, cue 2 will be all in open white 0 sec, i get all in open white 2 sec.

- The record selected, whats end with this thing?! its driving me crazy, its NEVER work like it shuld.


Amir
Danix
Israel
Parents
  • 0
    Amir,

    Are you trying to record a color to a palette and have it apply only to the specific fixture? If so then when you go to record into the palette you need to select "per fixture" from the record toolbar (press more to get to "per fixture"). This will then record the color information into the palette only for the fixture(s) you are recording. You can instead select "per type" to record for all fixtures of that type, but not others.

    Remember that by default all palettes (except position) will record as "global" unless you specify otherwise. This means those values will apply to any fixtures with the same paramter(s).
Reply
  • 0
    Amir,

    Are you trying to record a color to a palette and have it apply only to the specific fixture? If so then when you go to record into the palette you need to select "per fixture" from the record toolbar (press more to get to "per fixture"). This will then record the color information into the palette only for the fixture(s) you are recording. You can instead select "per type" to record for all fixtures of that type, but not others.

    Remember that by default all palettes (except position) will record as "global" unless you specify otherwise. This means those values will apply to any fixtures with the same paramter(s).
Children
No Data
Related

www.etcconnect.com