help with WSYWYG

when we get our brand new WHOLE HOG 3 i´ve found the WYSYWYG software inside the case. i have installed this in to my lap top.
some dongle device came along whit the CD and i understand that this is what i need to make the program run... but some thing promp on my screen saying " dongle console version only" =( ... and i realy don´t know what to do... i´ve been reading the user guide but there is, or i can´t find any clue about it...
i have learn kind of easy how to use the WYSYWYG on others people´s PCs and it will be very usefully if some body can, please, help me to start our own software and beguing to work on virtual stage.

thank you in advance and my best regard from lima, peru... :)
Parents
  • 0
    Hi,

    So I work at a college with a permanent Hog3 installation. We currently have the console and 1 DP2000. The school also has WYSIWYG Education Edition installed on multiple computers with the dongle connected over the network. My question is: what hardware do I need to connect the console to the computer with WYSIWYG on it? I was thinking I could use a router with the internet connection from the school's network connected to the WAN port and then connect the DP, console, and computer with WYSIWYG on it to the switch ports of the router. I'm not so concerned about connecting everything to the school's network right now as I am just getting the console, DP, and PC all on the same network. Will just a regular 10/100 ethernet switch do the job? I do have a decent background in computers and networking...this is just the first time I've had to apply it to my Hog 3 experience :147:

    Thanks!
Reply
  • 0
    Hi,

    So I work at a college with a permanent Hog3 installation. We currently have the console and 1 DP2000. The school also has WYSIWYG Education Edition installed on multiple computers with the dongle connected over the network. My question is: what hardware do I need to connect the console to the computer with WYSIWYG on it? I was thinking I could use a router with the internet connection from the school's network connected to the WAN port and then connect the DP, console, and computer with WYSIWYG on it to the switch ports of the router. I'm not so concerned about connecting everything to the school's network right now as I am just getting the console, DP, and PC all on the same network. Will just a regular 10/100 ethernet switch do the job? I do have a decent background in computers and networking...this is just the first time I've had to apply it to my Hog 3 experience :147:

    Thanks!
Children
No Data
Related

www.etcconnect.com