Please Help! This keeps bugging me. . .

:06:

I want to create a movement effect like a bally hoo, and use the fader to control speed and size. When I set the fader to Manual Crossfade, it sticks at the top of the fader. Then when I release , the fader is backwards. What is the best way to have the fader control the Speed and size, going higher at the top of the fader, and slower at the bototm? :trink26:
Parents
  • 0
    Are you talking about the flash led blinking on the IPCB master? The reason that some are flashing while others aren't is because when in a released state only masters that have the potential to effect intensity will have a flashing LED.

    Regarding your other comment, the intensity is probably snapping to zero because of a bug with mixing HTP faders and IPCB cuelists. Do you have an HTP fader controlling those same fixtures somewhere else in the show?
Reply
  • 0
    Are you talking about the flash led blinking on the IPCB master? The reason that some are flashing while others aren't is because when in a released state only masters that have the potential to effect intensity will have a flashing LED.

    Regarding your other comment, the intensity is probably snapping to zero because of a bug with mixing HTP faders and IPCB cuelists. Do you have an HTP fader controlling those same fixtures somewhere else in the show?
Children
No Data
Related

www.etcconnect.com