Problem with XPe Image 8.0.6

hy at all,

i have a problem with the new XPe - after the installation (complete restore) i have only a coursor on my 1st display and the Start Window on the left display - in the configuration panel i can see following error message: An unrecognized display device was found


pleas help me


thanx
Parents
  • 0
    Mike and Andrew,

    Can you please post here or email me directly the serial number of your consoles? This might be something specific to the motherboard and the serial number would help. We did not see this in any of our testing on all the models, but you guys have the problem so we are curious.

    If you need to get your desks running, I suggest installing the previous image and upgrading the Hog 3PC and Hog iPC config panel.

    thanks for your understanding,
Reply
  • 0
    Mike and Andrew,

    Can you please post here or email me directly the serial number of your consoles? This might be something specific to the motherboard and the serial number would help. We did not see this in any of our testing on all the models, but you guys have the problem so we are curious.

    If you need to get your desks running, I suggest installing the previous image and upgrading the Hog 3PC and Hog iPC config panel.

    thanks for your understanding,
Children
No Data

www.etcconnect.com