• State Not Answered
  • Date
    Cormac Jackson
  • Date
  • Replies 5 replies
  • Subscribers 5 subscribers
  • Views 151 views
  • Users 0 members are here

Colour calibration

Hi,
I'm am putting a tour together that starts in April 2008 which is going to have either
Robe 700 (wash/spots) or
Martin 700 (wash/spots) as the main fixtures.

This tour is going to run for a while and i would like to program it so that when the fixture types change i can take advantage of the "change type" function to it's best ability within Hog III.
At the moment neither of these groups of fixtures are colour calibrated in the fixture libs.
What's the chances of getting one set of these fixtures(either robe or martin) added as colour calibrated so that the programming will change as accurately as possible.
I understand it's not crucial for the change type function to be have colour calibrated lights but i was always under the impression is was more accurate doing it that way,please let me know if i'm correct on this.

Any posts appreciated.
C
Parents
  • 0
    Hi Marty,
    I was actually trying to get gel picker values back to CMY as they are "there" so to speak and i thought that i could just pull the values back into the programmer somehow and use them.
    Just downloaded a CMY to raw DMX value chart which gives appox values for colours in the LEE and Rosco range and will manually make col pallettes just like i've always done.

    thanks for the reply Cormac
Reply
  • 0
    Hi Marty,
    I was actually trying to get gel picker values back to CMY as they are "there" so to speak and i thought that i could just pull the values back into the programmer somehow and use them.
    Just downloaded a CMY to raw DMX value chart which gives appox values for colours in the LEE and Rosco range and will manually make col pallettes just like i've always done.

    thanks for the reply Cormac
Children
No Data
Related

www.etcconnect.com