Re-naming Groups

Having trouble today renaming Views. View 13 named Grp 1/5. In palletted views, tried renaming the group, but it would just go back to the old name - Whatever I typed.

View 2 was named 'Cuelist'. Mistakenly labelled it 'Group 1/6'. Open the box to corect the mistake - highlighted in the box was the label 'Cuelist'. Hmmmm. Typed in the word 'Cuelist' and hit Enter. Name changed back to 'Group 1/6'.

Log Off / Restart - no joy.

Tried again in the View "Spreadsheet view" - everything fine.
V2.3.1 b1932

Also several occasions of the Red Outline around a pallette dissapearing - despite my selecting the Pallette, so I couldn't rename. Touching the Blue Toolbarfixes it.


P
Parents
  • 0
    We have something very similar logged. Could this be what you are seeing? It deals with switching between spreadsheet and palette view:

    1- start a new show
    2- after the show launches, open the View Directory
    3- select Palettes and press SET
    4- you will see the word PALETTES on the button (this is correct)
    5- Press Enter and close the View Directory
    6- record a View, I used a simple CUELIST window
    7- Open the View Directory
    8- Select Palettes, press SET, you will see PALETTES (this is correct)
    9- press enter, then switch to Spreadsheet view
    10- now toggle back to the regular directory window view
    11- Select Palettes and press SET
    12- you will now see the word PROGRAMMER in the button, and if you try to rename it you can't - it will always go back to PALETTES
Reply
  • 0
    We have something very similar logged. Could this be what you are seeing? It deals with switching between spreadsheet and palette view:

    1- start a new show
    2- after the show launches, open the View Directory
    3- select Palettes and press SET
    4- you will see the word PALETTES on the button (this is correct)
    5- Press Enter and close the View Directory
    6- record a View, I used a simple CUELIST window
    7- Open the View Directory
    8- Select Palettes, press SET, you will see PALETTES (this is correct)
    9- press enter, then switch to Spreadsheet view
    10- now toggle back to the regular directory window view
    11- Select Palettes and press SET
    12- you will now see the word PROGRAMMER in the button, and if you try to rename it you can't - it will always go back to PALETTES
Children
No Data
Related

www.etcconnect.com