Update Probs

Hi

I'm working with catalyst at the moment and I think I have a update problem.
I'm doing alot of fine positioning of layers on projection surfaces using x,y and also alot of shuttering, plus everthing is in pallets.
What I am finding is that I might do a slight fine adjustment which is visible live then when I hit Update I'm not getting the option to update the pallet.
This is the first time of using the latest sw update, but I have never seen this problem with older versions and I work with media servers all the time.

Anybody seen the same problem.
Or am I missing something.

Cheers

Spooky
Parents
  • 0
    Hey Spooky,

    Two things that come to mind intially...

    1 - Are you using the Catalyst v4 or the v3 profile from the console? I seem to remember some old issue with full resolution not being implemented on older software versions and may still be an issue in the older v3 profile. I am not sure of this though.

    2 - Open up your DMX window and change the view to look at wherever your Catalyst is patched to...you should see the values change as you turn the encoder

    If you build a new palette does the information hold?

    Also just to rule it out....you are recording a BEAM palette correct? Otherwise make sure you "USE B" (and whatever else you have selected) from the masking toolbar on the bottom right hand screen when recording/merging into another type of palette directory.
Reply
  • 0
    Hey Spooky,

    Two things that come to mind intially...

    1 - Are you using the Catalyst v4 or the v3 profile from the console? I seem to remember some old issue with full resolution not being implemented on older software versions and may still be an issue in the older v3 profile. I am not sure of this though.

    2 - Open up your DMX window and change the view to look at wherever your Catalyst is patched to...you should see the values change as you turn the encoder

    If you build a new palette does the information hold?

    Also just to rule it out....you are recording a BEAM palette correct? Otherwise make sure you "USE B" (and whatever else you have selected) from the masking toolbar on the bottom right hand screen when recording/merging into another type of palette directory.
Children
No Data
Related

www.etcconnect.com