• State Not Answered
  • Date
    w8tah - Former HES Forum Member
  • Date
  • Replies 5 replies
  • Subscribers 5 subscribers
  • Views 278 views
  • Users 0 members are here

"test" or Raw DMX mode

Hi folks -- we were given 2 lights (optima mojo scan 1x) that i dont have a manual for -- they are 3 channel scanners --- is there a way that i can send "raw" dmx to a given channel (i know what dmx channel they are on from the dips) so that i can start to determine the functions based on that. feed it value x get result y etc?

thanks
Parents
  • 0
    [quote=jxgriffi]Just patch 3 generic desk channels to see what you need to do.
    i'd actually recommend building a custom fixture that will display the raw DMX values as you're working with them.

    please find attached a screenshot illustrating how to complete the Fixture Builder and how the resulting fixture behaves.

    Output 1, Output 2 and Output 3 are Beam functions, about halfway down.

    there is a small display bug: after you build and patch your fixtures, values displayed in the Programmer will be off by 1 until you quit your show and re-load it.
Reply
  • 0
    [quote=jxgriffi]Just patch 3 generic desk channels to see what you need to do.
    i'd actually recommend building a custom fixture that will display the raw DMX values as you're working with them.

    please find attached a screenshot illustrating how to complete the Fixture Builder and how the resulting fixture behaves.

    Output 1, Output 2 and Output 3 are Beam functions, about halfway down.

    there is a small display bug: after you build and patch your fixtures, values displayed in the Programmer will be off by 1 until you quit your show and re-load it.
Children
No Data
Related

www.etcconnect.com