ipcb fader question

Say I record a cue with just gobo rotate at full speed on a fader and choose the IPCB option.

Whether the fader is up or down, when I press > the cue goes to full.

I want to be able to have the fader down, push > and gradually introduce the rotate (or whatever is in the cue)

Am I missing the obvious?

The way it's working right now...
Fader down, push >, cue goes to full, bring fader all the way up and then all the way down, then things work fine.

btw I'm working in v2.4.0
Parents
  • 0
    To me, that would be correct...

    You record the rotation at full. When you push PLAY, it would run the full cue. Why would you need to press play when you're setup for IPCB on the fader?

    The way I do it is similar, but it's how you setup the OPTIONS.

    IPCB Fader
    +GO Off Zero
    +Release at Zero

    Now, you don't need to press play. Just raise the fader and you have speed control.

    Give it a shot and see if that's what you're looking for.

    (I'm assuming, as bad as that is, that you are building a separate fader to run the speed up and down...is this correct???)
Reply
  • 0
    To me, that would be correct...

    You record the rotation at full. When you push PLAY, it would run the full cue. Why would you need to press play when you're setup for IPCB on the fader?

    The way I do it is similar, but it's how you setup the OPTIONS.

    IPCB Fader
    +GO Off Zero
    +Release at Zero

    Now, you don't need to press play. Just raise the fader and you have speed control.

    Give it a shot and see if that's what you're looking for.

    (I'm assuming, as bad as that is, that you are building a separate fader to run the speed up and down...is this correct???)
Children
No Data
Related

www.etcconnect.com