ipcb fader question

Say I record a cue with just gobo rotate at full speed on a fader and choose the IPCB option.

Whether the fader is up or down, when I press > the cue goes to full.

I want to be able to have the fader down, push > and gradually introduce the rotate (or whatever is in the cue)

Am I missing the obvious?

The way it's working right now...
Fader down, push >, cue goes to full, bring fader all the way up and then all the way down, then things work fine.

btw I'm working in v2.4.0
Parents
  • 0
    The way I do things like this:

    Cue 1, rotation clockwise
    Cue 2, rotation counter clockwise

    Set the options like jxgriffi proposed but set also PLAY and PAUSE buttons to skip forward and backward.

    Now the next cue will be played when you will rise the fader and you can choose which is the next cue by PLAY and PAUSE buttons..

    There is a small bug if you will set the flash button "+go on flash". It will then actually not play the next cue but the cue after next cue. It's like pressing the "go" twice. Or is it a bug?

    Regards, sulkkis
Reply
  • 0
    The way I do things like this:

    Cue 1, rotation clockwise
    Cue 2, rotation counter clockwise

    Set the options like jxgriffi proposed but set also PLAY and PAUSE buttons to skip forward and backward.

    Now the next cue will be played when you will rise the fader and you can choose which is the next cue by PLAY and PAUSE buttons..

    There is a small bug if you will set the flash button "+go on flash". It will then actually not play the next cue but the cue after next cue. It's like pressing the "go" twice. Or is it a bug?

    Regards, sulkkis
Children
No Data
Related

www.etcconnect.com