global increase of cue fade times

Hey
I don't think this is a current feature, but I could be wrong. It would be great if you could increase or decrease fade times of a individual fade time cue + or - what they are already at.
ie.
I have a cue that fades up my desk channels over 4s, my leds over 6s and my movers over 10s. If i loaded the cue into the editor then typed in "TIME + 2" then the desk channels would be 6s, leds 8s, and movers 12s.
Much like you do with intensity values. (possibly you could do the proportional too)

Also. Being able to change time straight from the command line for cues for already recorded cues would be good. Ie " CUE 4 POSITION TIME 5s {enter}"
Just some ideas, what do other people think.
Parents
  • 0
    You can't use 'Time + X', but I like the idea. But you can use the encoder-wheel to change the time for all your different fixtures. Press 'Time', select 'Intensity'. Now use the encoder-wheel and the time changes with steps of 0.5 seconds.

    "Also. Being able to change time straight from the command line for cues for already recorded cues would be good. Ie " CUE 4 POSITION TIME 5s {enter}""

    You can already do this, exactly as you typed here. Pressing 'Time' once change the fade-time, pressing 'Time' twice will change the delay.
Reply
  • 0
    You can't use 'Time + X', but I like the idea. But you can use the encoder-wheel to change the time for all your different fixtures. Press 'Time', select 'Intensity'. Now use the encoder-wheel and the time changes with steps of 0.5 seconds.

    "Also. Being able to change time straight from the command line for cues for already recorded cues would be good. Ie " CUE 4 POSITION TIME 5s {enter}""

    You can already do this, exactly as you typed here. Pressing 'Time' once change the fade-time, pressing 'Time' twice will change the delay.
Children
No Data
Related

www.etcconnect.com