Last week i run my first network show with
Hog iPC and WH3, DMX runs from iPC internal widget and DP2000. iPC runs as show server with 8 dmx lines.
All desks run in v2.4.0, i know about new version but has no time to install it. (and no patchnotes about network improvements)
Show file attached: rapidshare.com/files/123060328/MAX_bck.hog3.tar.gz.html
There is empty file saved before programming, if complete file needed - i can save if from desk and upload later.
In few words:
problem exists when i interact with iPC programmer, and biggest stall hits when i try to rotate iPC shuttles.
Lags hit WH3 interactive responce (programmer and playback settings), and it hit responce of internal iPC wydget.
Smaller but visible hit: when i change playback options form iPC. Seems right after change WH3 stalls for 2secs (maybe desk download all data, not only changed?)
And truly strange - simple operation:take 100 desk chans on hand and rotate shuttle.
When i do this on iPC - there is visible delay for up to 1sec (no interactions with WH3 in this time)
When i do this on WH3 - clear. (no interaction with iPC)
When i don`t even touch iPC, WH3 runs faster, but anyway DP2000 responce much faster then iPC wydget.
(from iPC playbacks responce of 8 lines are same)
So now few questions:
1) Is it really possible to program networked show from two desks side by side? What if 2 desk are WH3?
2) Suggestions for "right" topology, where must be show server? Maybe on PC with Hog3PC, or on WH3? Can show server run normally with constant user interaction?
