What? LED Intensity is gone!!

What's going on?? Am I in IDIOT mode or has intensity for RGB LED fixtures disappeared?

I have a V2.4 show that has generic RGB LED fixtures.
COLOR gives a wheel for either HS or CMY
INTENSITY wheels are INTENSITY IRED IGREEN IBLUE

Now I discover that V2.6 no longer has a wheel position for INTENSITY.

What's the deal?

Is there a work around?

I've been trying different things with the fixture builder, but can't come up with anything that works.

Also tried to grab the fixture from the old show but was unable to do so.

How can I use the color wheel and control intensity too?

I'm working on HogPC right now and will be using a FullBoar for the show.
Fixtures are Colorblasts.
Parents
  • 0
    A-HA! Yes....this is a known issue....the Fixture Builder does not have the ability to create a profile like this with a "Virtual Master Intensity". Fixture Builder should only be used when a profile simply doesn't exist yet and you cannot get one quick enough for many reasons.

    Steve is very good at cranking out profiles for people.....just look at all the Library section of the forum!

    If you want to preserve your original file you can always Change Type from your custom built fixture to Generic-RGB LED and you will have full functionality again.

    Glad you figured it out!:)
Reply
  • 0
    A-HA! Yes....this is a known issue....the Fixture Builder does not have the ability to create a profile like this with a "Virtual Master Intensity". Fixture Builder should only be used when a profile simply doesn't exist yet and you cannot get one quick enough for many reasons.

    Steve is very good at cranking out profiles for people.....just look at all the Library section of the forum!

    If you want to preserve your original file you can always Change Type from your custom built fixture to Generic-RGB LED and you will have full functionality again.

    Glad you figured it out!:)
Children
No Data
Related

www.etcconnect.com