Hog3 PC and Coemar I-Spot 575 EB automatic Lamp-on

Hi,
I have 6 Coemar I-Spot 575 EB's that are being controlled from a Hog3 PC. Every time I run the Hog3 software the I-Spot 575's Lamp-on. And I have 1 I-Spot 575 MB that doesn't Lamp-on, so that leads me to believe its only a problem with the "EB's". None of my other fixtures lamp-on when this happens, only the I-Spot 575 EB's. And I've made sure that the lamp settings on the fixtures are set to "strike" and not "on". Also, the color and gobo wheels don't seem to line up correctly when called up on, unless I manually go in and select them. This fells like a fixture library issue. Does anybody have a suggestion, or experienced what I'm going through.
Thank you!
Parents
  • 0
    OK...well upon futher investigation I discovered a few things....(not the least of which is COEMAR's site is a royal pain in the ass to get information off of! :angryfire: :chairshot: )

    There are apparently 3 versions of the iSpot 575 and 2 fixture profiles for Hog-3.

    The original iSpot 575 only runs on 20 channels - use the iSpot 575 profile for these.

    The iSpot 575 MB + EB both run on 22 channels with only marginal difference in functionality - use the iSpot 575 EB profile for these.

    What profiles are you using?
Reply
  • 0
    OK...well upon futher investigation I discovered a few things....(not the least of which is COEMAR's site is a royal pain in the ass to get information off of! :angryfire: :chairshot: )

    There are apparently 3 versions of the iSpot 575 and 2 fixture profiles for Hog-3.

    The original iSpot 575 only runs on 20 channels - use the iSpot 575 profile for these.

    The iSpot 575 MB + EB both run on 22 channels with only marginal difference in functionality - use the iSpot 575 EB profile for these.

    What profiles are you using?
Children
No Data
Related

www.etcconnect.com