• State Not Answered
  • Date
    spld2 - Former HES Forum Member
  • Date
  • Replies 2 replies
  • Subscribers 5 subscribers
  • Views 226 views
  • Users 0 members are here

iPC Issue?

I am not sure if this is a console issue or not... I am having trouble with 2 VL3000's in that when they are called there is sometimes a 3-5 second delay before they come one. Knowing VL's like I do I assumed it was the fixture. I swapped out the 2 units in question with "fresh from the shop maintenance complete" and even these did it.

Any thoughts of what to check or look for in the patch maybe? Kind of stumped here... Thanks, in advance, for any help....
Parents
  • 0
    Mike,

    Thanks for the response. I have experienced this problem in both the programmer and while running cues. After placing the post checked for any timing/delays and found nothing out of the ordinary.

    I just find it strange that even after swapping the 2 units the problem is the same. I am leaning towards the fixtures needing a deep diagnostics but I didn't want to rule out a console setting issue or to see if anyone else has experienced something similar.

    Thanks again, I will let you know how it all works out.
Reply
  • 0
    Mike,

    Thanks for the response. I have experienced this problem in both the programmer and while running cues. After placing the post checked for any timing/delays and found nothing out of the ordinary.

    I just find it strange that even after swapping the 2 units the problem is the same. I am leaning towards the fixtures needing a deep diagnostics but I didn't want to rule out a console setting issue or to see if anyone else has experienced something similar.

    Thanks again, I will let you know how it all works out.
Children
No Data
Related

www.etcconnect.com