CK Colorblaze

Hi all,

I'm running a practice rig in my wyg R21 and connecting to HogIIIpc (2.6.0., Bld 2071). I've added colorblazes to the rig and can't find the units in Hogs fixture schedules. I've connected using a generic RGB LED, but when I fade them to zero they go white before they go out. Is there a different fixture schedule that has the CK units in them?


How would I implement the new schedule in the show, or will I have to rebuild the show in Hog.
Parents
  • 0
    It will be either 12 cells or 8 RGB cells....depending on if you have the 72 or 48 model ColorBlaze respectively.

    The white flash sounds like a WYG problem or a graphics rendering problem on you computer....any reason you are not running the newer R22?....the visualization is much better....it is now comparable to ESP Vision.

    What are the specs of your computer running the H3PC & WYG? (processor, graphics card, HDD, memory.....etc)
Reply
  • 0
    It will be either 12 cells or 8 RGB cells....depending on if you have the 72 or 48 model ColorBlaze respectively.

    The white flash sounds like a WYG problem or a graphics rendering problem on you computer....any reason you are not running the newer R22?....the visualization is much better....it is now comparable to ESP Vision.

    What are the specs of your computer running the H3PC & WYG? (processor, graphics card, HDD, memory.....etc)
Children
No Data

www.etcconnect.com