(2071) few Bugs Report

Hi,
bugs were find with full boar or Hog 3.

Full boar with 3 universes full:

* Significant slowdown of the output window when using one or two external screens in 1024 x 768 60Hz (not tested with Hog III)
* Select one fixture (not a group) changing pan and tilt select update palette (not a cue Enter only pan or tilt is updated redo the same all is updated. (I think I also already had something like that with Hog 3)
* Suck miss some value for one fixture, clear and suck again take all values.

Full boar and Hog 3

* Select one fixture apply values in programmer select another fixture (or more than one but not a group) both (all) are selected in programmer instead of only last selection.

Thanks
Parents
  • 0
    Suck miss some value for one fixture, clear and suck again take all values.
    >>hmm can you give more details on this one?

    Select lot of fixtures (many times All)
    Push Suck
    for one fixtures some values (one or two) are missing lot of time in Beam.(never happened with two or more).
    If i clear programmer and do it again all works great.

    Full boar and Hog 3

    * Select one fixture apply values in programmer select another fixture (or more than one but not a group) both (all) are selected in programmer instead of only last selection.
    >> We have not see this one either. Can you give exact key strokes?

    for example
    1 enter (focus wheel) 2 enter 1 + 2 are selected in programmer
    1 enter (focus wheel) 2 trhu 5 enter 1 thru 5 are selected in programmer

    It might also be useful if you send me your show

    Show is on the Road this week, I will send it next Sunday or Monday.

    These bugs are not systematic but repetitive

    Cheers
    Steph
Reply
  • 0
    Suck miss some value for one fixture, clear and suck again take all values.
    >>hmm can you give more details on this one?

    Select lot of fixtures (many times All)
    Push Suck
    for one fixtures some values (one or two) are missing lot of time in Beam.(never happened with two or more).
    If i clear programmer and do it again all works great.

    Full boar and Hog 3

    * Select one fixture apply values in programmer select another fixture (or more than one but not a group) both (all) are selected in programmer instead of only last selection.
    >> We have not see this one either. Can you give exact key strokes?

    for example
    1 enter (focus wheel) 2 enter 1 + 2 are selected in programmer
    1 enter (focus wheel) 2 trhu 5 enter 1 thru 5 are selected in programmer

    It might also be useful if you send me your show

    Show is on the Road this week, I will send it next Sunday or Monday.

    These bugs are not systematic but repetitive

    Cheers
    Steph
Children
No Data
Related

www.etcconnect.com