hi ya'll, i seem to be having a issue with two faders, the GM and fader #4, the GM fader doesnt go all the way up to 255, it physically does but the level never goes past 252, so the GM light keeps flashing......its just an annoyance more than anything....but then i realized that my #4 fader now does not go past 24%, so i am now wondering if there is some corruption or something....i have done a clean XPe restore and still get the same issue......:dunno: :dunno: :dunno: Help
Try launching the front panel diagnostics from the start screen. Do the faders behave the same way there?
If they do, it's most likely a hardware problem. When dirt and dust build up in the fader you can get this behavior. Fortunately, the faders are easy to replace if you're comfortable working inside your console.
I've seen a few consoles where the connector betwen the fader and front panel circuit board comes loose. Push lightly on the connector with your finger. If it starts to behave properly, then give service a call for resolution.
Try launching the front panel diagnostics from the start screen. Do the faders behave the same way there?
If they do, it's most likely a hardware problem. When dirt and dust build up in the fader you can get this behavior. Fortunately, the faders are easy to replace if you're comfortable working inside your console.
I've seen a few consoles where the connector betwen the fader and front panel circuit board comes loose. Push lightly on the connector with your finger. If it starts to behave properly, then give service a call for resolution.
